2012 wide Technology & it establishment with Taj International, Saudi Arabia for the following products
BITUMINOUS LIQUIDS/
COATING PRODUCTS
D
– 41BITUMEN PRIMER
BITUMINOUS ANTICORROSIVE BLACK PAINT
BITULAST
Is
a solvent based synthetic Rubberized Heavy duty coating good elastomeric
formulation. Suitable for exposed substrate where high weather protection
required
ASPHADAMP
It is
Bituminous Damp proof coating
ASPHALT
PUTTY
Bituminous hot applied Putty compound for Roof repair/sealing
application. Acts as Joint Sealant, Moulding Putty
ASPHAL
TO PLAST
Is
Trowel grade Solvent based Mastic Bitumen. Which forms Tough Membrane on cure,
will not sag and impervious to weather Elements/Water proofing. Thixotropic in
Nature.
THERMAGUARD
Is an
Aluminum Modified Bituminous Coating suitable to many substrates on cure it
will reflect the U V Rays and protecting the substrate, helps to tolerate
temperature.
BITUFLASH
Is a
trowel grade solvent based Rubberised Bituminous Flashing and sealing Compound
suitable for roof flashing, crack sealing on concrete, old joint repairing
Joint & Crack Filling.
BITUMEN
EMULSION
RS
1, MS 1, SS 1 Water based Bitumen Emulsion Cationic & Anionic Low solid
High Build.
ASPHALATEX
Latex
Modified water based Bituminous Coating. Can
also use as Adhesive to laying work of light weight boards and water
proofing applications.
FIBERO
COTE
Is
solvent based cellulose fiber formulated pliable Bituminous coating stabilized
with Minerals, Special Additives to withstand against Extreme Summer &
Winter Climates.
BITUMEN
JOINT SEALANTS
a.
Cold Applied Elastomeric Sealant.
b. Hot
Applied Bitumen Joint Sealant
COALTAR
EPOXY COATING
Good Anticorrosive Coating, suitable to many Anticorrosive
Application. Tanks, Under pipes Sewage
Project bodies.
RUSTGARD
Bituminous Rust Preventive Coating, Special Additives Added for enrich
protection against Rusting & Corrosive Elements.
CUT
BACK BITUMENS
MC, SC, RC Types
POLYMER MODIFIED AND CRMB BITUMEN FOR ROAD PAVING
APPLICATION
POLYMER MODIFIED
BITUMEN MEMBRANES/ ROLLS
1. APP
MODIFIED TORCH APPLIED BITUMEN MEMBRANE
Thickness: 3mm, 4mm, 5mm
Top Finish: Slated also
2. SBS
MODIFIED TORCH APPLIED BITUMEN ELATOMERIC MEMBRANE/ ROLL.
Thickness: 3mm,
4mm, 5mm
Various gm/m2 Polyester
Reinforced,120,150,180,200,220,250
3. COLD
APPLIED RUBBERIZED BITUMINOUS MEMBRANE/ SHEET, SELF ADHENSIVE.
Thickness: 1mm,
1.5mm, 2mm, 3mm
Top Finish: Aluminum
Film, P.E. Film, XLP. E FILM, PET FILM
POLYFIBER GUARD
Is a Torch Applied App modified Bitumen Membrane. Reinforeed with Twin
carrier. Non woven polyester (150 g/m2) along with 50 g/m2
FIBER GLASS MET.
Oxidized
Grade Bitumen
Following oxidized grade bitumen can be
manufactured for Industrial use:-
A] Oxybit 10/20
road construction
B] Oxybit 30/40
road construction
C] Oxybit 60/70
industrial application
D] Oxybit 85/25
battery cell mfg use
E] Oxybit 90/15
industrial application
F] Oxybit 90/25
oil grade industrial use
G] Oxybit 115/15
ink mfg/ Type mfg/industrial uses
H]] Gilsonite is oil free bitumen for industrial /oil
field drilling /ink mfg
Non
Bituminous products
ACRYLIC
COATINGS & WATER BORNE PRODUCTS FOR WATERPROOFING AND BONDING AGENTS
HIGH Elastomeric Acrylic exterior coating Low solid interior Acrylic Coating with semi gloss property Feather touch
smooth TEX ULTRA Acrylic
paint for interior
wall Masonary surfaces/water washable
after complete curing. With spl Additives, anti fungus
weather resistance longlast.
Characteristics:1 component Acrylic Roof &
joint sealant high elastic composition
ensures
Long
last weather resistance, Antibrittleness at low temperature
SBR
& PVA concrete Bonding agents
Concrete
curing compounds, mould release oils
PVA
Joint sealant/joint compound, Caulking
Application too.
For
gypsum board partition work at interior cabin set up.
------------------------
No comments:
Post a Comment